· 支持灯控的产品在实时预览界面点击 [更多] - [灯控]，展开后可选择 [常开] [自动] [常关] 三种状态

    [常开] 受控的照明灯保持开启状态，但壁灯设备2小时后自动关闭

    [自动] 系统程序控制照明灯的开启或关闭状态

    [常关] 受控的照明灯保持关闭状态，不会自动开启

Introduction of dual light camera

  1) Dual light source devices refer to the products that both have white light and infrared lights

  2) The light control and image attribute functions are both set to [Auto], the image mode of dual light source device:

    a. When the device is working in night mode, the screen is in black and white mode by default, and the infrared light turns on

    b. When the device triggers a motion alarm, the screen switches to color mode, the infrared light turns off, and the white light turns on

    c. After the alarm stops triggering for a period of time, the device returns to black and white mode, the white light turns off, and the infrared light turns off

  3) The user can adjust the light sensitivity of the device to control the frequency of the device switching the image mode

  Note: Only dual light source device has the function of motion detection sensitivity adjustment

Light sensitivity adjustment

  1) After connecting the device in App, click [Settings] icon in the Device list, select [Lamplight sensitivity settings] to enter the setting interface

  2) Users can select three sensitivity modes of "Low, Middle, High", the higher the sensitivity, the easier it is to trigger the light control mode switch

  · 在设备列表点击 [设置] 图标 - [灯控设置]，打开 [定时开关] 设置并设定 [开始时间] 和 [结束时间]

  注：若设置界面未显示灯控设置图标则不支持该功能

  · Infrared light, night vision monitoring infrared light, is a supplementary light device that cooperates with surveillance cameras to collect images at night, and does not support manual control. When the camera is at night or in an environment with insufficient light, the infrared light will automatically turn on, and the image will switch to B/W night vision mode. In bright environments, the infrared light will automatically turn off and the image will switch to color mode

  1）自动模式下，带白光灯的设备在白天时白光灯是不亮的，可点击开灯测试白光灯是否正常

  2）自动模式下，带白光灯的设备在晚上夜视状态时，若触发移动侦测则亮白关灯（起到灯光警戒作用），若不触发，白光灯则自动关闭

  3）若以上操作不行，可能是设备硬件故障，请联系商家售后维修处理